CPCV-SERIES pneumatic internal concrete vibrators can make very steady vibration 17,000~17,700VPM from rotating of pneumatic rotor by poweful compressor and remove all excessive water, air gap and impurities in concrete mortar so that concrete structure become stronger and better surface.
					
					
					
					
					
					
| MODEL | CPCV55 | CPCV65 | CPCV75 | |
|---|---|---|---|---|
| Head Diameter | mm / inch | 55 / 2.16 | 65 / 2.56 | 75 / 2.95 | 
| Head Length | mm / inch | 314 / 13.54 | 340 / 14.37 | 366 / 15.67 | 
| Head Weight | kg / lb | 4.5 / 9.9 | 7.9 / 17.38 | 8.9 / 19.6 | 
| Amplitude (Total at tip) | mm / inch | 0.94 / 0.037 | 1.37 / 0.054 | 1.78 / 0.070 | 
| Frequency (Max. at 85psi) | VPM | 17,700 | 17,700 | 17,000 | 
| Centrifugal Force (Max. at85psi) | kg / lb | 675 / 1484 | 1158 / 2548 | 1490 / 327 | 
| Air Consumption (Max. at 85psi) | cfpm | 54 | 54 | 85 | 
                    Specifications
| Model No. | CXP-2 | |
|---|---|---|
| Inlet | mm / inch | 50 / 2.0 | 
| Outlet | mm / inch | 50 / 2.0 | 
| Head max | m / ft | 15 / 49.2 | 
| Volume max | l / hr | 56400 | 
| Material of housing | Aluminum | |
| Material of impeller | Stainless steel (SUS304) | |
| Length of flexible shaft | Mm / ft | 6 / 19.6 | 
| Coupling | Dynapac coupling | |
| Total weight | Kg / lb | 26 / 57.2 | 
Applications
                    Specifications
| Model No. | CPV-1 | |
|---|---|---|
| WEIGHT | Kg / lb | 7.5 / 16 | 
| DIMENSION (W) x (L) x (H) | mm / inch | 330 x 400 x 1,500 12.9 x 15.7 x 59.0  | 
						  
| TYPE | BACKPACK | |
| DRIVE / TRANSMISSION | CENTRIFUGAL CLUTCH | |
| COUPLING | PIN, SCREW | |
| ENGINE | ||
| BRAND | HONDA | |
| MODEL | GX35 | |
| TYPE | AIR-COOLED 4 CYCLE ENGINE | |
| FUEL | GASOLINE | |
| OUTPUT | Hp / KW | 1.4 / 1.05 | 
| UNLOADED SPEED | SAE 10W / 30 | |
| MAX. SPEED | RPM | 7,000 | 
| TANK CAPACITY | gal | 0.63 / 0.16 | 
| WEIGHT | Kg / lb | 3.3 / 7.2 | 
| STARTING METHOD | RECOIL STARTER | |
| SPEED CONTROL | THROTTLE LEVER | |
| ENGINE STOP | EMERGENCY STOP BUTTON | |